Below are .zip packages available for download containing technical drawings regarding the Drainwave® and the Drainwave® logo in DWG file format.

Please select the file format you wish to download via the buttons from below.

Drainwave® Unit Information

• The lid is tested to allow installation in normal foot traffic areas.
• Increases solid waste ejection volume to greater than 9 litres per dose to help avoid pipe blockage.
• Drainwave® pipe connections suitable for 100 diameter sewer pipes.
• The Drainwave® has 2 inlet ports to make installation easier and to allow for the connection of overflow relief gully (ORG) if required.

Typical Installation Instructions

• Typically installs beneath the ground or in the non-habitated parts of the house.
• Installation should be as close as possible to very low flush toilets (< 2 metres) with other waste water introduced upstream of the Drainwave®.
• In vehicle traffic areas the Drainwave® can be protected with the addition of a proprietary gatic lid.
• Connects to standard 100 diameter overflow relief gullies.